Filter barrier or aquaphor. Geyser and akvafor filters for hard water

Filters for cleaning

For those who are just thinking about buying a filter for water purification, it is very easy to get confused in a huge number of models from different manufacturers presented in stores.

The most popular devices from the companies "Aquaphor" and "Barrier". To find out which company filters better, consider the features of each of them, the pros and cons, the procedure for operation and maintenance.

Let’s figure out why it is worth choosing water filters for Aquaphor and Barrier

The Barrier and Akvafor companies have been the undisputed leaders of the Russian market for water treatment systems for many years. Their products regularly win awards at international exhibitions and receive high marks from experts.

Leading manufacturers offer a wide range of stationary and mobile filters, which differ in design and type of design, performance, resource of replaceable elements and cost.

Jug Type Filters - the most affordable, and therefore the most common type of water purifier, it is able to free water from various impurities. Manufacturers of filter jugs guarantee deep purification of water from chlorine, iron and organic impurities, certain types of cartridges can reduce the level of fluorine.

Outwardly, the filter resembles an ordinary jug with a lid; the advantage of this design is compactness and mobility. The disadvantages of jugs include a small resource and low productivity (about 300 ml per minute). Replaceable elements (cartridges) must be replaced approximately once every 2 months.

The company "Aquaphor" today produces 14 models of filter jug \u200b\u200b(accumulative) type in volume from 2.5 to 4.2 liters. The maximum resource of the replaceable module is 350 liters (Provence A5 model). According to the manufacturer, the jug filter effectively purifies water from mechanical and organic impurities, removes active chlorine and heavy metals.

The Barrier company has 16 models of filter jugs in volume from 2.5 to 4.2 liters. The maximum resource of the replaceable module is 350 liters (any filter model with a “standard” cartridge).

Flowing stationary filters for installation under the sink - The most effective, efficient and expensive variety of filters. Each model comes with a separate faucet, which additionally cuts into the sink for a set of drinking water.

This type of filter can have several degrees of water purification (usually 3-5). By combining different cartridges, you can individually combine such a filtration system that is able to purify tap water from most known pollutants.

They deserve special attention reverse osmosis systemsin which water purification occurs due to a special semi-permeable membrane. It retains high molecular weight pollutants, passing only water molecules.

In the Aquaphor company line, the Aquaphor OSMO 50 and Akvafor OSMO-Crystal 100 filters operate on this technology. The company Barrier is a system of "WaterFort OSMO", "K-Osmos", "Pro Osmo 100".

The advantages of stationary water treatment systems include the highest degree of purification (for reverse osmosis systems, it exceeds 99%) and long service life (average life of such a filter is about 10 thousand liters).

Osmo systems make tap or well water absolutely safe and useful by removing bacteria, viruses, chlorine, heavy metals, nitrates, traces of drugs and other undesirable impurities from it. Reverse osmosis systems eliminate scale because they completely remove hardness salts from water.

Water Pitchers Aquaphor or Barrier - Overview of Design Features

We offer to compare pitcher filters Aquaphor and Barrier by key parameters:

Cost. Jugs from Aquaphor and Barrier companies belong to the same price category. The cost of the first at the time of writing varies from 250 to 590 rubles, the second - from 330 to 785 rubles.

A new cartridge filter always comes with one replaceable cartridge (filter module).

Design. Both companies regularly update the range of filters, new items that differ in modern design appear. Both in the first and in the second case, the buyer is offered to choose not only the shape of the jug, but also the color, thanks to which you can choose a model for any interior.

Durability. Both manufacturers claim that their jugs (meaning the case itself) will last at least 5 years.

Design features. Structurally, all filter models are the same, they consist of a jug, a funnel for filling tap water, a lid and a removable cartridge (cartridge).

According to customer reviews, filter jugs of both manufacturers are convenient to use, in the line of each company there are models that are placed on the refrigerator door.

The quality of cleaning. Filters Barrier and Aquaphor are suitable for filtering tap, borehole and well water. The Barrier cartridges are filled with granular sorbent; Aquafor additionally uses its own sorbent fiber (Aqualen).

Both those and other filters have a similar structure. They consist of a lid, the jug itself, a water funnel and replaceable cartridges.

Both companies have developed an assortment of different filter models. They may differ in the shape of the jug, calendar features (electronic or mechanical), the presence of a resource indicator of the purifier. The final price of the product will depend on these parameters.

The way to replace the cartridge is the same for any manufacturer - just unscrew it from the device and replace it with a new one.

The principle of water purification is somewhat different. Barrier filters are based on filtration using granular sorbents, and Aquafor devices use sorbent fiber, as well as ionized silver, which kills bacteria more efficiently than Barrier devices.

Of the advantages of Aquaphor, it is also worth noting:

rugged and comfortable case,
comfortable water supply system,
the presence of additional cleaning.

Among the shortcomings of the Aquafore cleaning systems, it is worth noting the rapid loss of transparency of the jug.

VIDEO ON THE TOPIC

Advantages of Barrier devices:

additional purification from chlorine and iron,
water becomes softer after cleaning.

Disadvantages of Barrier devices:

some buyers have noticed a musty taste of water,
scale may remain in the kettle.

Thus, unambiguously answer, which filter jug \u200b\u200bis better, difficult. However, according to statistics, most often a domestic buyer still opts for Aquafor products, partly in view of a more aggressive advertising campaign, Barrier devices confidently occupy the second line.

What is the difference between the models of flowing water filters for washing?

As for the stationary filtering systems Aquaphor and Barrier, they also work on the same principle: the water passes through several cartridges in series, and at each stage of cleaning certain types of impurities are removed from it.

The most popular model by far from the company Aquaphor - DWM-101S Morion. Compared to other reverse osmosis filters, it is compact and economical. If for the full operation of most models a pressure in the system of at least 3 atmospheres is required, then 2 atm is sufficient for the DWM-101S Morion. The cost of the filter is 8900 rubles.

The most popular stationary filter model from the company Barrier - Pro Osmo 100 M. This is a modern 6-speed classic reverse osmosis filter with a mineralizer. Pro Osmo 100 M is designed for deep purification of tap water. An additional mineralizer allows after purification to saturate the water with useful minerals - calcium, magnesium, fluorine.

Maintenance of water filters Aquaphor and Barrier

The concept of maintenance of water filters for the home, regardless of the manufacturer, includes primarily the replacement of filter material.

Pitchers require periodic purchase of new cartridges. Replacing them is very simple.

To do this, you must:

remember the name of the jug model so that you can purchase a suitable replacement cartridge in the store,
unscrew the old cartridge,
screw in a new one
pass water through it 1-2 times.

After that, the device is completely ready for use.

This algorithm is the same for technology and the company "Aquaphor", and the manufacturer "Barrier".

If you purchased a device with three levels of cleaning and installed it under the sink, all three elements will require replacement.

To do this, you must:

Shut off the water supply,
Relieve pressure by opening taps with water,
Without disconnecting the supply hoses, remove the housing from the kitchen cabinet,
Using a special key, unscrew the primary cleaning cartridge, remove the contents and put a new filter on either side, screw the cylinder back,
Similarly, unscrew the next filter - complex cleaning, then screw in a new cartridge and then screw on the bottle,
Remove the cylinder of the last third filter and replace the cleaning element,
Turn on the water and make sure that the device is tight and that there are no leaks.

In general, both the Barrier filters and the Aquafor filters are similar in maintenance, and you can replace the cartridges at home without the help of specialists.

Which filter model to choose? To choose the right filter, you need to know what impurities need to be removed from the water. To do this, experts recommend an analysis of tap water in an accredited laboratory.

Having accurate data on hand, you can choose the best water purifier.

For example, even the most inexpensive filter of the jug type is capable of reducing the iron content in water; if it is required to remove excess fluorine from water, a more efficient osmo system will be needed.

When choosing, you should also pay attention to the filter performance and the resource of the replaceable element.

Experts recommend installing a reverse osmosis system, since such filters carry out the deepest water purification from centralized supply sources. Such water can be drunk raw for children from the age of two, and even for allergy sufferers.

The regular consumption of water and the problem of its treatment in Moscow every year is becoming more acute. There is a need for high-quality filters, since only they are able to make water usable. There are a large number of companies that manufacture filters, but most of them can not cope with the task. In order not to make a mistake with the choice, you should trust the trusted manufacturers who have proven themselves to the best extent. When asked which water filter is better than Aquafor or Barrier, customer reviews cannot give a definite answer. It is important to carefully familiarize yourself with all the features of a particular model in order to be sure of your choice.

The rivalry of these companies leads to the fact that new technologies are regularly created, and the cleaners themselves are becoming more and more high-quality. It cannot be said which water filters are better: Barrier or Aquaphor or Geyser, since each brand has a large number of fans. But you can always determine the features of the products of these manufacturers. For example, the Barrier company positions its filter jugs as purifiers created especially for Russia, that is, when cleaning, chloride compounds, heavy metals and other harmful elements contained in water are taken into account. Those same people who, when answering the question of which filter is better - Aquafor or Barrier - choose the first option, may refer to the fact that this company has created particularly effective membranes using carbon components.

Advantages and disadvantages of Aquafor and Barrier filters

Despite the fact that the Aquafor or Barrier filters are similar in appearance and have many identical components, each of them has its own advantages and disadvantages, which should be familiar with before making a purchase.

The advantages of Aquaphor filters include:

Strong and durable housing.
All filters are equipped with a comfortable water supply system that does not require any effort.
Cleaning is carried out in several stages, which does not affect the feed rate, but at the same time guarantees maximum efficiency.

In turn, the barrier is distinguished by the following advantages:

The presence of special cleaning from chloride and glandular compounds, which is full of running water.
The liquid is not only cleansed, but also softened.

Regardless of which filter jug \u200b\u200bfor water is better: Aquaphor or Barrier, both of these models are of high quality and favorable price. That is why most buyers do not pay attention to the choice and acquire the first available option. However, do not forget that there are also disadvantages. For example, jugs from Aquaphor quickly lose their transparency, and Barrier products do not protect the kettle from scale.

Barrier, Geyser and Aquaphor: Filter Comparison

If with jug filters everything is pretty obvious, since the products of leading companies are pretty similar, then with the rest it is much more complicated. Water filters for washing, which is better: Barrier or Aquaphor or Geyser? This question does not have a clear answer. Systems for washing, which include reverse osmosis devices, are considered the most expensive and effective, so any mistake will lead to waste of money.

Barrier, Geyser or Aquaphor filters, how to choose filters? The best solution is to carefully study all the advantages and disadvantages that the selected model has, as well as take help from outside. When asked which water filter is better - Aquaphor or Geyser - reviews of those who already use these devices will help to answer as fully as possible. It is enough to use various sites and read independent opinions on the products of these companies.

A comparison of Geyser and Aquaphor flow filters will help to accurately identify that Aquafor products are highly reliable and able to cope with any difficulty, while Geyser filters have the best cleaning system. At the same time, Aquaphor and Geyser are inferior to the Barrier in terms of filter maintenance and difficulties with regular cartridge changes.

So what to choose?

Having carefully studied all the models presented on the shelves of modern stores, we can conclude that here everyone can find a suitable option for themselves. A comparison of the Geyser and Aquaphor filters, just like the Barrier, cannot reveal one clear leader who should be preferred.

It is important to understand that it is not necessary to determine which is better: Barrier or Aquaphor filters. Initially, you need to analyze the water, since it depends on it which purifier is needed. Most of the negative reviews addressed to this or that company are connected with this error. People initially buy not what they need, and then get upset when the selected filter does not do what is required of it. In this case, Aquaphor, Geyser or Barrier are in the same conditions, developing new, effective systems.

In order not to guess which filter to choose: Aquaphor, Barrier, Geyser or any other model, just contact our company for help. We will help you conduct a water analysis and determine exactly which cleaner is best for you. So you can protect yourself from waste and get clean water for many years.

In the filter market, several manufacturers are fighting for the consumer at once. Geyser and Aquaphor are some of the most obvious opponents. This is not to say that one of them is clearly better than the other. But each of them has its own characteristics, which we will discuss in this material.

Comparison criteria

You can come up with a dozen parameters for comparison, but we have identified 7 of the most important:

assortment of water treatment equipment;
the presence of its own research and production base and new developments introduced by the company. Do they have their own "chips";
simplicity of equipment maintenance;
interchangeability of filter elements. It's about those very replaceable cartridges;
product design;
warranty obligations;
price threshold

Despite the fact that in our thematic sections (and) the lion's share of products from Geyser and Aquaphor is presented, when comparing we will use information from the official websites of companies - http://geizer.com and http://www.aquaphor.ru. To compare prices, we will use data from online stores linked to the above sites. All information is relevant at the time of writing (late October 2016), but with high probability it can be useful even after a few years.

Variety of model range

In our understanding, water treatment equipment should include everything: from main filters to jugs. Somewhere between them there should be a place for water treatment plants, flow filters, reverse osmosis systems and shower heads. Let's start with the simplest.

Jugs

Filter jugs are the simplest products for treating drinking water in a domestic environment. They are intended only for the post-treatment of liquid that has undergone preliminary preparation at urban water treatment plants. The range of Aquaphor company includes 15 models of jugs with a total volume of 2 to 4.2 liters. Each of the varieties comes in several colors. Color varies for funnel, cap, and sometimes for pen. The resource of the filter module is 170, 200 or 300 liters of medium quality water. There are products with a mechanical and electronic counter. Price range: from 10.7 rubles. up to 17.4 rub.

Geyser has a slightly narrower range: there are 6 models. However, this does not prevent the manufacturer from satisfying the demand for jugs of different volumes - from 2.5 to 4 liters. Some of the items are equipped with a mechanical or electronic calendar to remind you to replace the filter element. Price range: from 7.6 to 25.7 rubles.

Summarizing the above: Aquafore has a wider range of jugs, but the Geyser allows the buyer to choose a cheaper model.

Flow filters

Both companies offer a wide selection of flow filters, installed mainly under the sink in the kitchen. Among them there are products with one filter element, but mainly we are talking about the so-called "triples" - equipment with three cartridges. Directly to price comparison. For example, it costs around 93.3 rubles, and its analogue is 76.2 rubles. Still at a cost: Aquafor Trio Fe - in the region of 100.7 rubles, analogue - 82.3 rubles.

At the Geyser, the “grooves” are made in the classic version, but at Aquaphor, in addition to the classics, there are original designs with disposable modules. A distinctive feature of the classic “triples” from Aquaphor is the use of a molded lid instead of the national team (lids are what 3 flasks are screwed to). The same solution is applied in filters. Accordingly, the one-piece design is more reliable and minimizes the risk of leakage. Although over the entire period of our online store’s operation, geysers of this kind met only when our customers incorrectly replaced the cartridges.

The complete set of each device is tied to the quality of the liquid being cleaned, for example:

for hard water;
for glandular water;
for water of average quality, etc.

This is very convenient if you know exactly about the nature of the liquid contamination.

Also in the lineup of both companies there are such devices.

In essence, these are similar offers. The product from Aquaphor can be equipped with various cartridges. To compare prices, consider the most affordable options. So, it will cost you about 168 rubles, while - it will pull all 192.4 rubles. At the same time, the cost of replaceable cartridges does not differ for the presented trim levels.

Reverse osmosis systems

In the list of RO systems that provide the most complete liquid purification in domestic conditions, Aquaphor has 9 models, and Geyser has 7. It should be noted that in the first case we are talking about a greater variety of designs, while in the second the emphasis is on the classic version. Let's see what each of the manufacturers offers us. Of course, we are only talking about equipment for domestic use.

Geyser reverse osmosis systems are built on the basis of classic models - similar products can be found in most manufacturers of household filters. Such designs have three prefilters on the first level, placed in flasks with caps, on the second level there is a membrane case with a membrane, a postfilter. It can also be a mineralizer, a booster pump, etc. - depending on version. As a storage tank, a hydraulic accumulator with a rubber diaphragm is used, separating the air and water chambers. As compact solutions, the use of In-Line cartridges and membranes in the housing is proposed. This option is relevant for water without a significant content of solids and chlorine.

As we have already said, the range of reverse osmosis plants at Aquaphor is wider. There is a place for classic models, like the Geyser, Crystal models with sealed modules (no need to unscrew the flasks - the cartridge changes immediately). There was a place for systems with a water-water storage tank, for example, Morion DWM 101. This is the so-called automatic water purifier. There are solutions combining flow filters and jugs (without a pressure storage tank). To compare the cost, similar models were taken: at a price of 183.3 rubles, - from 244.4 rubles

Original developments

Summarizing the above, we can note the active research work of both companies.

Convenience of service of filters

This comparison criterion is more relevant for flow and reverse osmosis systems. Everything is individual here, but in fact Aquaphor has more convenient models in terms of replacing cartridges. The design of such models allows you to change the filter elements in literally a minute. At the same time, Geyser has to unscrew the flasks, drain the water, rinse the walls of the flasks, install the cartridge and reinstall everything in place, checking the tightness of the connection.

Cartridge versatility

Standard sizes and mounting methods for filter cartridges are provided to ensure interchangeability of replaceable modules. Using systems with these cartridges, you can always replace them with products from other manufacturers. Those. You are not tied to the components of the company under whose TM the system case is manufactured. It is right and convenient for customers. This is what Geyser does.

At Akvafor everything is a little different. There are a number of classic systems and filters, which are suitable for standard size filter elements. However, many models are equipped with proprietary modules of the original design. This is convenient in terms of their routine replacement, but imagine a situation where the right cartridges are simply not on sale. And there is nothing to replace them with!

About warranty

The vast majority of Aquafor filters have a 1-year warranty. Geyser has such a guarantee only for main filters - for the rest it is MORE. There are 3 and even 5 years! These are really good conditions.

Conclusions?

It would be wrong to say unequivocally which is better. Everywhere has its own nuances, and everyone should set his own priorities for himself. We just tried to outline the main points in order to simplify your purchase. Good luck choosing!

Which filter is better? -such a question is asked by everyone who is concerned about the problem of choosing a filter.

Choose a triple filter

---
I will try to help you a bit with this task. In this article, we will choose a water filter. What is needed in order to choose a filter that optimally matches your water and takes into account the capabilities of your wallet.

1. Water analysis Analyzing water in a laboratory is expensive, but if you do it, you can more accurately select a treatment that matches the water pollution in your area. But even if you do not do a water analysis, that's okay. Now we will learn how to test our water using the basic pollution indicators using the simplest methods. For this...

2. You need to conduct a visual analysis of your water . To do this, pour water from the tap into a glass and let it sit for 5-10 minutes. We look at the result: if the water is clean and transparent and there is no suspension or sediment at the bottom of the glass, then the water is considered free from visible mechanical impurities. Otherwise, there is mechanical pollution. Next, look at the color. Water, which has a slightly yellowish or brownish color, contains dissolved iron or manganese.

Then, cool a little and pour. We again pour water from the tap and put it on gas. (I don’t wash the pan, if any impurity remains in it) Boil another 20-30 minutes. Cool, and drain the water.

3. We draw conclusions:Now we drag our fingers along the walls of the pan and look. If there is a chalk coating on the fingers, then the water has a large amount of calcium and magnesium in its composition and is considered super-hard. If there is no deposit on your fingers, but your kettle has lime deposits on the walls, then your water is hard. If your kettle is always perfectly clean and the pan after the experience has remained spotlessly clean, such water is considered soft. Those whose water turned out to be soft, you need to pay attention to the color, whether the color of the water has changed after boiling, or maybe instead of limescale, reddish blotches are present from the pan. (Very often, soft water is accompanied by the presence of ions of 2 and 3 valence iron in it). Basically, those simple experiments that we have just completed are quite enough to choose a decent filter.

If you are a resident of Almaty, you can determine the hardness of your water by area of \u200b\u200bresidence. This is written in the article.

4. Choose a filter . The first thing we pay attention to is the manufacturer. The manufacturer must be reliable. Why? Because only in this case you buy a filter that has already been assembled tested for the corresponding pressure drops in the water supply system, and this is an important indicator. Otherwise, when leaving home, you will have to constantly shut off the cold water supply tap, in order to avoid rupture of the system or buildings. (Of course, it is impossible to predict all cases, and especially the condition of the water pipes in the system, but the percentage that your filter can withstand a sudden pressure drop is much higher for a well-known manufacturer than for filters with a dubious source of origin). For example, Geyser filters (Russia) are tested for a pressure of 25 atm, while in a central water supply system, the water pressure rarely reaches 3 atm. Aquaphor filters, for example, have the strength of plastic housings, equivalent to metal plastic., Etc.

It is believed that there is no difference, all the same, everything is done in China and there is no need to pay more if there is cheaper. But don't forget that avaricious pays twice. If the filter goes under the brand name of a well-known, established company, even if we assume that it is made in China (and now there is little that is not produced in China), then its production was fully adhered to the production process, including the use of only food-grade polymer compounds, adsorbents of the highest quality, as well as plastics intended for use in the food industry. Filters that have a dubious manufacturer (and many of them are generally not called the manufacturer, but the seller) are most likely assembled manually according to the corresponding scheme. Such filters usually use outdated water treatment technologies, or cartridges that are not designed to treat pressure water. Well, of course you choose.

5. Select cartridges. Next, look at the filter elements. A high-quality cartridge should have on itself, or with itself, a description of what it consists of and what its porosity is, as well as the name of the manufacturer, its addresses and phone numbers, purpose, resource, temperature of use, standard of manufacture, dates and dates of storage. Cartridges, even if they consist of a carbon carbon block, can have the purpose of pre-cleaning. Cartridges made of bulk coal can serve as chemical cleaning elements only in filters without the use of external pressure.

6. What you need. I’ll say right away, we will choose between reverse osmosis and flow filter, consisting of three buildings, whose resources are designed for water use by a family of three five people during the year.

Recently, there has been a crush on the use of reverse osmosis systems. But ... Here you must understand that the water purified by RO (Revers Osmosis) completely lost its minerals and not only them. On the one hand, it’s good (there is no one to breed), on the other hand, too soft water, when used daily, leaches calcium from the body. Now there are pseudo-scientists who say that our body does not take any minerals from the water anyway, since it cannot absorb them. You don’t have to go far, you can conduct a simple experiment with a teapot overgrown with scale. If soft water is constantly boiled in it, all the scale will fall off by itself, without the use of special acids, and for a relatively short period. The same thing happens with our body. Therefore, Reverse Osmosis (RO), as a necessity, should be used only in areas with super-hard water, for the simple reason that three-case flow systems, even with technology such as Geyser, will exhaust their resources too quickly, and thereby delivering a lot of hassle of regeneration to their owners. Although, if the process is slightly more expensive and instead of regenerating the ion-exchange resin, simply changing the internal filling of the cartridge, which is generally cheaper than changing the entire cartridge, it will be a decent filter for super-hard water. (I now mean the models Geyser 3ives, Geyser 3ivzh).

Aquaphor Filters (Trio 03-04-07, Crystal 03-04-07), even in the "toughest" configuration, it is a bit weak for super-hard water. When I say weak, I mean that the cost of restoring the ion-exchange properties of the filter will be higher than that of the Geyser. Why? The “Aquaphor” filters in the “hard” configuration have only one cartridge, which is responsible for the removal of hardness salts. Geyser in a similar configuration has one more element, which is also the main element of the filter, but is also designed to remove hardness salts - Aragon-2. In addition, Aragon-2 has one important feature that cartridges from other manufacturers do not have. Water, after passing through the element Aragon-2, changes its structure in the field of calcium (it passes from one state to another, which no longer takes the form of a stone), this effect is called "quasi-softening". Calcium is present in water, but does not form stone deposits on the walls of dummies, and therefore on the walls of blood vessels and in the kidneys of our body (read more about Aragon-2 ) .

For water of medium hardness, you can use ready-made offers andAquaphor and Geyser . Basically, these are systems consisting of carbon carbon blocks connected in series, differing in porosity and arranged in an appropriate order. Typically, these structures have one of the elements of an ion-exchange resin cartridge, which in areas with hard water lasts an average of 6 months, and taking into account regeneration (i.e., restoration of properties) up to 6000 liters.

For areas with soft water, there are also ready-made offers from both manufacturers, however, Geyser also has filter models that are also designed to completely remove iron ions from water. In such kits there is an element "Damper" (in detail).

Another recommendation. If you buy a filter where an ion-exchange resin cartridge is present, make sure that it is second, always after a carbon or polymer cartridge (which traps chlorine), the ingress of chlorine compounds onto the resin quenches its activity as a softener.

For areas where water is mainly contaminated with mechanical impurities, a turnkey solution using a polypropylene cartridge as a trap for mechanical impurities will be relevant. If water is actively saturated with iron ions, a polypropylene cartridge must be selected with a porosity of not more than 1 μR. Larger porosity retains rust poorly.

And the last. If your water comes from an unknown source, or this source has not undergone initial treatment, like urban water supply, or you just want to protect yourself and your loved ones from microbes that multiply in water, Geyser has a great filter option in different modifications (hard, soft water ) Geyser "BIO". The cartridge used in these kits has a certificate of conformity for the use of filter water without boiling. Color copies of certificates are available in the product passport.

If you have any questions during the reading process, you can ask them in the comments section, or call Phones in Contacts. We will gladly help you with what seemed difficult or incomprehensible to you.

-
12/25/2011 Admin

You can remove unwanted impurities from water using a variety of devices. To remove rigidity, with such technological progress today is easy and affordable. Well-known filters such as the Geyser or the Aquafor filter brand will help to do this inexpensively and quickly enough. But how to choose one device from them? What's better?

Geyser as a means of combating stiffness and iron

The geyser for hard water is basically similar, but there is still a difference in capabilities and price. And although many consumers focus primarily on cost, opportunities also need to be considered. Sometimes over time it’s more profitable to overpay at first than to spend more later to buy a more advanced model.

Of the convenient filters for home use, there are just two models - Aquaphor and Geyser. The process of operation of the devices will be considered using the example of Geyser 1 Uzh. This marking indicates a device that can eliminate not only, but also glandular impurities.

A similar installation includes:

Filter with replaceable cartridge;
Coal insert;
Assumes cartridge restoration;
Housing made of white or clear plastic

Modification of the Geyser filter may include an iodine dispenser. The cartridge in this device is made of good coconut charcoal. It was also specially treated with silver so that during operation, the bacteriological sediment would not spread. This type of cleaning cartridge even has an international certificate of quality, which once again confirms its good performance.

Geyser has created a special filter material Aragon. The bottom line is that inside the coconut cartridge is another type of filter material. It is created on the basis of cardon-block technology. This helps him purify the water from chlorine, bacteria and even salts of heavy metals.

The main advantage of the Geyser Aragon is the elimination of almost all impurities in tap water. At the same time, the cartridge will essentially notify itself of the need to restore it. As soon as water begins to pass poorly through its surface, then the time has come to restore.

Cleaning rates are approaching one hundred percent. It turns out in terms of quality of cleaning. The geyser is very close to fine filters.

But problems can arise, for example, during installation, but here manufacturers have provided for everything. Installing a Geyser is easy. A divertor is screwed onto the tap, which looks like a logical tip. The filter itself can be mounted or placed under the sink so that no one sees it.

To start the geyser in operation, just turn the switch on the detor and purified water will flow into the tap. in such a device is also convenient. Unscrew the lid, put a new cartridge in place of the old one and everything, the filter is back in operation. A big plus of this installation is that it can be restored at home without spending money on dismantling and the time of transportation to the master.

Using just such a Geyser filter at home will be quite relevant.

Features: Aquaphor vs Geyser

The main advantage of the AquaFor device is its price. It is easier to find, it does not need to be installed. And, as a rule, this is one of the first softening devices used by ordinary consumers. Below are the characteristics of impurities and their percentage ratio after exposure to the filter medium of the AquaFor device.

Today, thanks to the development of technology, many people have begun to use filters for water treatment in a house or apartment. In order to live normally, a person needs to drink at least two liters per day. Only pure water is a rarity. Residents of megacities, regional centers, most often face such a problem. But, as you know, you want to survive and you’ll come up with something else.

Aquafor household softeners help guaranteed to get soft, not just water, but drinking water. And if the geyser relieves almost all impurities, except for mechanics, then Aquaphor has slightly less opportunities.

The base of the filling in the Aquaphor filters is activated carbon of the highest quality. Make it from coconut shell. In this, the devices are similar. Only in this device, instead of a special material, an ion-exchange resin is used inside. It turns out that this installation is excellent, removes some benzene-cadmium precipitates, but it does not fight biological sediments and viruses at all.

But thanks to the ion-exchange properties of the resin, this Aquaphor perfectly softens water, and does it quickly. If the water is very hard, then the treated water can always be passed through the filter again.

A feature of Aquaphor is the fact that their ion-exchange resin is special. This is a specially developed Aqualen material. Here the resin has a different form of fiber, which helps to expand the cleaning possibilities. Such a filter element absorbs water faster. The process of capturing and retaining hardness salts proceeds much faster, and retention is more effective. Bacterial coating helps bacteria not develop on filter surfaces.

Russian manufacturers - Aquaphor and Geyser are gaining popularity. For those who are looking for a home-made soft water device, they are indispensable. For permanent support, it is better to use a Geyser, but if you plan to transfer the installation, then Akvafor is better. Thanks to the above information, it will be easier to determine the model.