Which company water heated towel rail to choose. Which water towel warmer is best for your bathroom

Wells

To reduce humidity in the bathroom and be able to dry wet towels, install a special device called a heated towel rail. The most common type of such plumbing is a water heated towel rail, which is connected either to a hot water supply or to a heating system. What characteristics does this plumbing device have, from what materials is it made and how not to make a mistake when choosing a suitable option for your bathroom?

pros

Such a device for a long time maintains dryness in the room, and also heats the bathroom. This helps protect the room from mold and mildew due to humidity.
Unlike electric models, it is independent of power supply and more economical (no need to pay for additional electricity spent), and also does not require grounding and special moisture-proof sockets.
In addition, the use of water-based towel rails is safer because there is no risk of electric shock.

Minuses

The device will not work if the hot water supply stops (in the event of an accident or during planned outages) or the heating season ends.
Installation of a water heated towel rail is quite complicated, therefore, for independent work, you need to have experience and special knowledge.

Kinds

A heated towel rail, purchased for a bathroom, can belong to one of these varieties of these plumbing devices:

To electric. Such towel warmers are powered by the mains, so when you install them you have to pay more for bills for light.
To the water. Their work is based on the circulation of hot water inside the device.
To combined. They are quite expensive, but combine all the advantages of the first two types. The main advantage of the combined device is work all year round - in winter from heating, and in summer from electricity.

Towel water, depending on the type of connection is lower or side. The lower version is more common, but when installing the side, you can easily hide communications, which affects the appearance of the room.

Forms

Water heated towel rail happens:

Standard - M-, P- or MP-shaped.
Staircase.
Ring-shaped.
Zigzag.
With shelves.
Individual form.

Materials

For the manufacture of water heated towel rails use the following materials:

Stainless steel.
Galvanized steel.
Black steel.
Brass.
Aluminum.
Copper.

Models made of galvanized or black steel attract with their safe operation, ease of installation, and good technical characteristics. Copper and brass products are inexpensive and attractive in appearance, but they do not last very long (up to 6 years).

Is stainless steel a worthy choice?

Stainless steel products can be called one of the most durable. They are characterized by high strength, corrosion resistance, as well as long service life. Such a steel heated towel rail can last 20 years or longer.

What characteristics should I look for?

One of the common mistakes made by towel warmers is to choose a device based on its appearance. First of all, it is important to take into account the features of the use of such plumbing, and only at the final stage of the choice - will the product fit into the interior.

When buying a water heated towel rail, you need:

Make sure that the product is provided with a passport, as well as a warranty card.
Carefully inspect the pipe. First make sure it is solid. If you connect a heated towel rail to the heating system and live in a high-rise building, the water pressure in the pipes will be high and if there is a seam on the pipe, there is a high probability that it will diverge. Next, find out what material the pipe coating is made of. It can be chromed or enameled, while the first option is more reliable.
Make sure that the device has a vent valve. If it is absent, air can enter the heated towel rail, as a result of which its operation will be difficult.
Consider the nuances of installation in your bathroom. For example, by connecting a heated towel rail to the heating system, you will make such plumbing useless in the summer. If you connect the device to hot water, the temperature of the heated towel rail will be determined by the capacity of the drawdown. If a heating connection is selected, it is important to consider the pressure in the system. With centralized heating, pressure drops are very common, but with autonomous heating they do not happen, because the pressure will be constant.
Choose the shape of the product, taking into account the characteristics of the house in which it will be installed. For high-rise buildings, it is advised to choose a coil so that when heated, the product does not deform and does not collapse.
Check if the diameter of the selected heated towel rail matches the pipes in the bathroom. If differences in diameter are found (and this is often found when buying a model of foreign production), you should additionally purchase an adapter.

In the post-Soviet space, it was not necessary to choose a device for drying: in most cases, there was one metal option with the letter “G”. But today everything is completely different.

When choosing a water heated towel rail for your bathroom, you should consider the strength and frequency of the pressure drops in the heating system, which changes so often. It is necessary to take into account the highest indicator, which can reach 10 atmospheres, which is typical for apartment buildings.

Water heated towel rail is a stylish decoration for your bathroom.

The main role in choosing a water heated towel rail is played by its technical characteristics. Take a good look at the parameters of the drying device, as well as view consumer reviews.

Among the technical indicators, pay attention to the installation method: it is important at the beginning of the finishing work in the room. Knowing the installation process in advance will save you time and money.

Remember, a heated towel rail is not an easy bent pipe with hot waterToday it is an important device for drying clothes, giving aesthetics and comfort to your home. It is better to take his choice very carefully, without seducing the first beautiful and cheap model.

Water heated towel rail - what is it?

Towel dryer is a device for drying clothes, presented in the form of a bent pipe; often mounted in the bathroom. It should be noted that the principle of operation of different heated towel rails may differ: the device can operate on electricity using central heating (that is, the device is filled with hot water) or by combining the two methods.

Water devices are initially included in the bathroom equipment: a metal coil is mounted on the wall along which passes hot water. The heated towel rail is used not only for drying towels and linen, but also for preventing the formation of mold and mildew.

The disadvantage of this device is its dependence on the availability of hot water and a long heating time. However, there is an advantage in the drawback: the device is heated slowly, but it also retains heat in the pipes for a long time.

The heated towel rail does not spoil the design of the bathroom.

What materials are the towel dryers made of?

Previously, home drying devices were exactly the same: the material and shape coincided. Today, a heated towel rail can be purchased separately and the choice of material is yours.

Materials for making a heated towel rail:

stainless steel;
black steel;
non-ferrous metals: copper, brass, aluminum.

Stainless steel fits almost any room. Outside, the dryer is polished, stained or chrome plated.

Chrome-plated models are more durable, painted devices stand out by their shorter shelf life, although they look attractive.

Black steel stands out against the background of stainless steel, as inside the heated towel rail is covered with a special tool that protects the device from corrosion. Thanks to what the service life increases.

On the outside, black steel is almost no different from a conventional stainless steel model.

Non-ferrous metals are more likely decoration in the bathroom than a practical addition. Unfortunately, copper or brass towel rails will not last you a long time, although they have good heat dissipation.

To choose a high-quality and durable device, you should carefully consider the choice of material. It will become the key to long-term work.

Choosing a heated towel rail: what should you pay special attention to?

Robust stainless steel heated towel rail.

Which device is better to choose is a non-territorial issue, but a specific one. You can easily choose the best device, the main thing is to pay special attention and not to buy the first beautiful heated towel rail that comes across.

It is very important to take into account the pressure in the pipes when buying, so find out the pressure indicator in the water supply system of the house in advance, add a few items and choose a device for drying.

You can find out all the technical indicators of the water device from the device passport.

Often the cause of poor-quality and short-lived operation of the device is corrosion in the pipes, which appears due to the ingress of oxygen into the water. Therefore, you should choose a heated towel rail with a protective inner coating.

Pay attention to the shape of the device. The heated towel rail is mainly made in two forms: in the form of a short flight of stairs or a coil. Reviews note that the shape of the ladder is more practical to use: it holds more laundry and allows you to dry things in length.

But with all the advantages, the coil remains the sales leader why? The coil shape is more accessible and easy to install. Indeed, for a ladder it is necessary to redo the riser, which leads to undesirable expenses.

The classic forms "M" and "P" are still produced, however, and they are equipped with convex rails.

Dimensions of heated towel rail. Choose the size based on the space that you have set aside for drying. If classic sizes are not suitable for you, a towel dryer can be ordered separately.

The height of the "ladder" varies in the range of 400–1200 mm, the width is the distance in the center.

The width of the "coil" varies in the range of 400-1000 mm, the height is the distance in the centers.

Heated towel rail "Coil".

When choosing a size, do not rely on the principle of “which fits, we’ll buy one”. The water heated towel rail should harmoniously fit into the design of the bathroom without cluttering it.

Pay attention to the material the device is made of.

Black steel is distinguished by fragility, quickly rusts, the device is made of a thin pipe.

A stainless steel water device is more practical. But it is difficult to replace, especially on its own. They do not differ in special esthetics, the surface of the device is polished.

Models M and U shape are durable and practical, service life reaches 10 years. The ladder shape is also popular, thanks to stainless steel the shelf life is high.

Water towel warmers made of copper are considered quite practical, but expensive. Brass as a material for the manufacture of drying devices is also popular. The term of use reaches 10 years, however, due to solid precipitation falling out of impurities in the water, the pipe diameter decreases, which can reduce the operating time of the device.

The heat dissipation of non-ferrous materials is low; it can be cool in the bathroom.

When buying a dryer for non-ferrous metals, make sure that the inside is coated with an anti-corrosion agent.

Stainless steel drying devices are often faked, so buy the appliance only in a specialized store and request the appropriate documents.

Color of heated towel rail. The modern manufacture of towel drying devices is not limited to classic white or chrome.

Now you can buy a heated towel rail matt, glossy or any color that suits the interior of the bathroom. However, color models are produced in rather limited batches, so you need to order individually.

Pipe diameter. Pay attention to the ratio of heated towel rail and central heating pipes. The diameter must match, otherwise you will need an adapter.

Mount. Ask your consultant and read in the passport of the device whether fasteners are included in the kit. If not, purchase separately, taking into account the characteristics of the device.

Manufacturer. Often the price of a heated towel rail corresponds to the rating of the manufacturer.

Finnish manufacturers are most trusted: drying devices differ high quality and service life.

Original heated towel rail.

Also trusted are manufacturers from Germany and other European countries. Drying devices are distinguished by a rotary mechanism. This feature should be considered when choosing a place for installation.

When choosing an imported heated towel rail, remember that our domestic mechanism is not always suitable for imported devices.

Unfortunately, domestic models are less practical and durable than imported ones. Which affects a more affordable cost. European manufacturers offer models that are practical, functional and attractive, which affects the cost.

When wondering which heated towel rail is better, it’s difficult to say the name and number. You must choose the appliance according to your means, bathroom capabilities and household requirements.

How to choose a water heated towel rail in the bathroom?

This question is asked by many people who started repairs in the apartment.

If you want to know the answers to the most common questions on this topic, then read the article.

Secrets of choice

Before heading to the store for a purchase, review the information on water towel warmers and be sure to check out the photos of their designs.

Possession of this information will allow you to choose the right model, which is guaranteed not to disappoint during operation.

The design of this product must have a high-quality assembly and a solid joint of joints.

If the quality of the welds of the metal seems unsatisfactory, then refuse to purchase the model.

It is better to choose the option that is completely satisfied with all indicators. The best way to join the seams in modern models of heating devices for the bathroom is laser welding.

Remember that you can choose completely seamless monolithic patterns, which are abundantly presented in modern plumbing stores and malls selling home goods.

If you do not know how to choose the size of the tubular product, then contact the store’s consultants or calculate the maximum allowable size of the installed model using a specialized formula.

If the space of the bathroom does not allow the installation of a large stylish water heated towel rail, then you can choose small narrow or angular versions of these products, which are distinguished by their compactness.

If you are the happy owner of a luxurious bathroom with a large size, then you can choose any model from the presented ones, without limiting yourself.

If you want to create an exclusive bathroom interior, then take a look at products that have stylish and unusual shapes.

Before you finally choose a model of a heating product for your bathroom, evaluate its wall mounting system and, most importantly, disassemble with a store manager a diagram of its connection to the water supply system.

Connection of water heated towel rails can be:

diagonal
lower;
lateral.

The most functional and heat-intensive are water towel rails, suggesting a diagonal connection scheme.

Products of this type are best placed within a large bathroom.

If the size of the bathroom in the apartment is relatively small, and you do not want to clutter it with a stylish, modern, but large heated towel rail with a diagonal connection, then look at the more compact sizes of these products with side connection.

If you want to choose a high-quality heated towel rail for your bathroom, then ask the store's specialists to show you those product models that are equipped with a Majewski tap.

This faucet allows you to bleed air from the towel rail pipes to prevent the occurrence of air jams that reduce the quality of the product.

Visual characteristics

The classic water-type heated towel rails that are familiar to all residents of the Soviet and post-Soviet space are made in the shape of the letter “P” or the letter “M” with rounded corners.

Photos of such heated towel rails prove that they organically fit into modest interiors, not burdened with an abundance of details.

If you want to diversify the look of your bathroom, then install a water heated towel rail in it, which has additional functionality and is made in the form of "ladders", "gratings" or any fantasy figures.

Photos of such heated towel rails clearly demonstrate that they can become a stylish addition to any ultramodern bathroom design.

Some modern heated towel rails are equipped with hooks that allow you to place towels and other things on them without dragging them through the pipes.

Other models are equipped with swivel mechanisms that allow free rotation of products around their axis.

Products based on rotary mechanisms have greater reliability in operation and are able to withstand the large weight of things placed on them.

Products presented in modern stores can be painted in various colors, for example, in bronze, brass, copper, silver, white and even black.

If you buy a water heated towel rail, painted in a "non-metallic" color, then be sure to ask the sellers what paint was used to tint the product.

If the heated towel rail is painted using powder spraying of a coloring pigment, then feel free to buy this model, since this coating is very durable and protects the product from external corrosion processes.

After reading this article, you were able to find out about the main specific characteristics of products such as water towel rails designed for installation in bathrooms.

Before making a purchase of this product, carefully weigh the pros and cons and do not take rash decisions to enjoy the quality of your purchase for many years.

Plumbing manufacturers present a huge number of bathroom fixtures that keep up with technical innovations and can please with a modern exterior design. How to choose a heated towel rail from the whole abundance of the assortment, simple recommendations will help. It is important to consider not only the appearance, but the pros and cons of a particular product.

Towel Dryer Classification

Drying devices are classified according to several criteria. These include the type of heating, production material, structural and design features.

The first thing you need to pay attention to is the type of heating. Based on this, we can distinguish:

Water heated towel rail;
Electrical model;
Combined products.

We will analyze in detail each device, its operation method, advantages and disadvantages.

The water device works thanks to the source of hot water in the house. It can be autonomous heating or another source of hot water.

Clean drinking water passes through the equipment. This reduces the risk of corrosion, but does not completely eliminate it. Therefore, you should choose the most durable material to the negative effects of water.

The disadvantage of a heated towel rail is the lack of hot water in the summer. Because of this, the operation of the device in the warm season is impossible. Unless from autonomous heating, which will have to be constantly maintained.

Installation of the structure includes fastening with nuts to the hot water system. For waterproofing, it is recommended to use gaskets made of different materials. Gaskets must be replaced periodically to avoid leakage.

Important! It is best to choose stainless steel heated towel rails with a drain valve. This will prevent startup problems after turning off the hot water.

Electric heated towel rails are powered by an electricity system. Such a heated towel rail can be hung in any comfortable room and used only if necessary.

The dryer does not draw much electricity. Its operation is equal to the use of a 100 W bulb.

A clear advantage of the device is the heating temperature. It is at most 60 degrees, so the equipment is safe.

The operation of the dryer is carried out thanks to a heating cable or an integrated heating element.

Electrical products are divided into two groups:

"Dry." Inside is a cable that is more secure than a tubular electric heater.
Oil. They have high heat capacity. After disconnecting from the electrical system, they continue to hold heat.

You can install a heated towel rail in an inconspicuous way: the cable connects to the junction box and hides in the wall. Such installation is possible only with autonomous control.

The equipment is powered from a conventional outlet

Using a special box or remote control, the system turns off and the temperature is regulated. The safety system of such equipment is pleasing. If problems occur, the dryer is switched off. This will protect against overheating.

The device can also be connected to a conventional outlet.

The power of the dryer is from 25 to 1200 watts.

Important! The distance of the electrical appliance from the water pipes should be between 600 mm.

This kind of heated towel rail in some cases can replace the radiator and heat the room.

The combined view can work from both sources of heating. If necessary, you can switch the operation of the dryer to a convenient mode. If there is a problem with turning off the hot water, you can operate the equipment through electricity.

The instrument circuit includes:

Water part;
Electric pipe;
Connection for connecting to hot water;
Cord for connecting to the mains.

It is also worth noting the rotary properties of heated towel rails. This function allows you to rotate the device 180 degrees from the wall. The most popular are chrome swivel heated towel rails.

Chrome metal is suitable for almost any interior. Swivel structures are found in every type of dryer.

Based on a detailed analysis of each type of device, you can decide which heated towel rail is better to choose.

Features of the water model

Let us consider in more detail which water heated towel rail is better to choose for the bathroom. In this case, it is important to consider not only the principle of operation, but also other features of the dryer.

The nuances of choice can be safely attributed to the appearance of the product. Most popular models:

In the shape of the letter "M";
In the shape of the letter "P";
Zigzag;
Ladder.

Manufacturers continue to surprise customers with a variety of shapes, so you can find completely unusual designs.

The number of pipes will allow each member of the family to dry the towel. In addition, the distance between the pipes will allow you to hang several wet towels at once. Other appliances may surprise with protruding shelves.

Consider the material from which the equipment is made. Constant contact with water determines its features.

Iron products are the cheapest and inferior in quality to other materials. The best option is stainless steel. Such material will withstand the necessary pressure and is resistant to corrosion.

For private homes, brass or copper is suitable. They withstand medium pressure. When choosing steel, get ready for quick metal corrosion. If the pipes are completely filled with liquid, then there is a chance to extend the life of the product. Otherwise, oxidation begins.

Important! Joints of pipes should be made of one material, otherwise corrosion will appear at the joints.

From the above, you can summarize how to choose a heated towel rail for a bathtub of water type:

Options in the standard form of letters will become economical. They fit perfectly into a small room, do not take up much space. In addition, the installation of such installations is much simpler.
For a large bathroom, products with wide stainless steel pipes are suitable. For example, dryer-radiators must be connected to the heating system.
Consider pressure and corrosion when choosing product material.
If you are not confident in the installation, then do not risk it. The specialist will protect from the negative consequences of inept installation.

Installing such a model in a bath room will be absolutely safe.

The nuances of the functioning of electric models

When determining which heated towel rail to choose, it is worth paying attention to an electric device. Electric models have undeniable advantages:

Attractive design
Exclusion of leaks;
No need to worry about pressure;
Easy installation
The ability to install anywhere in the apartment;
The ability to regulate the operation of the device.

The danger of using an electric towel dryer can occur with increased humidity in the bathroom. To exclude the possibility of electric shock, consult a specialist. He will be able to mount the device most safely, with the concealment of wires.

Important! Buy and order installation of a heated towel rail in one company. This will eliminate the problem of returning equipment in the event of a malfunction. Otherwise, the company may curtail the breakdown for violations of installation rules.

Two types of device can be distinguished: with a cable and a pipe filled with water or oil.

What you should pay attention to when choosing an electric heated towel rail:

Cost. Equipment with a cable will cost less due to the lack of a closed loop.
A device with water or oil can completely heat the room. Cable dryers are less powerful. They are enough only for drying towels.
Installation Cable products can be mounted in any form. Liquid appliances are limited in this right.
Dryers with cable heat up faster.
Adjustment of functions. More often the temperature regulator is found in equipment with liquid, otherwise it can warm up to very high temperatures.

Are foreign manufacturers a guarantee of quality?

An important aspect of choice is the manufacturer. Imported models have a stylish design and a wide range of choices. By this they are attractive to the consumer. But the choice of imported heated towel rails has several pitfalls.

European models are connected to the heating system, for which water is specially treated. Therefore, the product is not used to pressure drops and corrosion. But some models have taken these features into account and may please the customer with durability.

When choosing an imported product, check the equipment for shutoff valves. They will help reduce pressure in the pipes.

When deciding which company to choose a heated towel rail, pay attention to the following manufacturers:

Zehnder is a device from Germany. Represents products of different functionality. The company offers painted heated towel rails for any color, it can perform chrome plating or enamel coating.
Margaroli - Italian towel dryers. They amaze with their appearance, aesthetes will like it. The material of manufacture is brass with a different coating.
Warmos is a Finnish device. The safest option.
Arbonia is a German manufacturer. Quality and interesting design in one device.
Gorenje - simplicity and accessibility.
Vogel & Noot - Made in Australia. A wide range of instruments goes through several levels of quality control.

The Russian manufacturer is also represented on the market. Such companies as Thera, Trugor, Dvin, Terminus managed to prove themselves from the best side.

Which heated towel rail is better to choose?

The material of manufacture should be given special attention when choosing a dryer, because it determines which heated towel rail is better. The material must withstand the required pressure and be resistant to corrosion. Let's consider all options for dryers:

Stainless steel. It is important that a seamless pipe is used in the manufacture. This guarantees resistance to pressure drops. The downside is heaviness. The wall thickness of the stainless steel pipe must be at least 3 mm - this guarantees the quality of the product.
Black steel. It does not have corrosion resistance. Suitable only in the case of an autonomous heating system. Poor quality means low cost.
Copper. They are resistant to corrosion, heat up quickly and give off heat, are lightweight and do not cause installation difficulties. For central heating, make sure that the outer walls of the pipes are galvanized.
Brass. It conducts heat well and is resistant to corrosion. The internal chrome coating will extend the life of the device. Minus - they can not always carry pressure.

We can conclude that when choosing a material, not only its properties are important, but also the presence of protective coatings, wall thickness, and painting. It is necessary to take into account the features of heating the apartment and rely on available funds.

When the bathroom is fully equipped, the question may arise how to choose the right heated towel rail. You need to pay attention to the type, material of manufacture, apartment features, price parameters and your own needs.

High-quality equipment that will last a long time can not be cheap. If you wish, you can purchase a good budget option, having previously familiarized yourself with all the pros and cons of different types and materials.

Towel dryer is a device designed to dry wet towels and reduce humidity in the room, in addition it heats the bathroom. This appliance cannot be called heating, because hot water runs through it, and not the coolant of the heating system; in city apartments it works all year round. In winter, it performs the function of additional heating. Towel dryers are installed in addition to the main heating to dry things in small rooms or corridors.

Water is used as a heat carrier in a water towel dryer, and its operation may depend on many reasons. Devices can be divided by the type of connection to the system - upper, lower, lateral, throughput of the coolant, power and material of manufacture.

Structurally, a water heated towel rail is similar to a heating battery, which is a pipes of different or identical diameterswelded into a multi-channel heat exchanger. A properly installed water heated towel rail in the future does not need constant monitoring, the technical parameters of the device correspond to the characteristics of heating radiators. He becomes full efficient heaterwithout adding economical costs to the central heating system.

In appearance water heated towel rails are:

Standardhaving the form of a bent pipe, in the shape resembling the letters "P" or "M" with a small heat transfer of about 0.5 kW.
Modernizedhaving shelves (advanced ordinary heated towel rails).
Elegant, representing devices of original forms such as ladders, foxtrot and others.

Water towel warmers can be made:

Stainless steel. For domestic conditions - this is the best choice. The outer part of such devices can be chrome plated, painted, polished.
From non-ferrous metals. Such devices have a short service life due to the exposure to water aggressiveness at high temperatures in the heating and hot water circuits and the presence of harmful impurities that destroy the pipes.

What to look for when choosing

Before you buy a water heated towel rail for replacement in a riser, you need to ask the housing office about the pressure in the water system, and select a device to match this parameter.

When buying a heated towel rail, in addition to appearance, you need to pay attention to the following issues:

Keeping this little instruction in mind, you can safely go to the store and choose a heated towel rail that you like.

Video instruction for choosing a heated towel rail

Overview of the most popular brands - models

Today, the market has a large selection of water heated towel rails of various types. It is very difficult to immediately determine among the devices available for sale when all of them are suitable for you according to technical parameters.

St. Petersburg company Sunergea produces water heated towel rails from simple models to design developments. The products of this company are distinguished by reliability, durability, made of stainless steel. The technical parameters of the devices fully comply with SNiP. Pipes are purchased abroad and in the production process at each technological stage checked for integrity from exposure to high pressure. The devices are fully adapted to the central heating system and can withstand temperatures of 105˚C, designed for pressure from 3 to 25 atm. They can be installed not only in the bathroom, but also in the corridor, kitchen and other small rooms.

To give the appearance of a mirror surface, finished products are polished in several steps. Towel dryers can also be sprayed in various shades using a special spraying technology to give them an even more elegant look.

The simplest types of products are P-shaped heated towel rails, with a power of 0.5 kW and a price of 1800 r.

One of the most popular appliances is water heated towel rail "Elegy"representing a gracefully curved coil. All elements are located in different planes, and this makes it possible to more efficiently dry household items. The heat transfer of such devices is from 230 to 621 watts, and the size range begins 60 * 40 cm and ends with 120 * 60 cm. Prices, respectively, from 7500 r. up to 13 500 r.

Series "Galant"these appliances are also popular. Its traditional appearance, the location of jumpers, practicality do not leave the buyer indifferent. The company produces 14 types of this model, differing in size. They can be selected for a room of any size, the size of the devices is from 50 * 40 cm to 120 * 60 cm, corresponding to heat transfer from 183 watts to 568 watts. The price is also attractive - 6,800 p. to a smaller size and 13,700 p. - for more.

The basis of the series "Bohemia" - the elegance and functionality of jumpers. The device is available in 16 sizes and can be supplemented with a shelf. It is made of food-grade stainless steel and can withstand pressure from 3 to 25 atm and a coolant temperature of up to 105 ° C. The minimum size is 50 * 30 cm, and the maximum is 120 * 60 cm, power is respectively from 197 to 834 watts. The price of this series starts at 8,200 p. to a small size and ends with 17 900 p. at the largest.

The Furor series looks unusual, having a size range from 60 * 60 cm to 100 * 90 cm, at a price, respectively, from 9,100 rubles. up to 13 000 r.

Production Russian company "Nika", one of the leading manufacturers of stainless steel heated towel rails, places high demands on its products. Each device is tested for strength with a water pressure of 40 atm, application plasma polishingmakes appliances dazzlingly shiny, adding a sense of comfort and cleanliness. The assortment of the company includes 1400 standard sizes, 53 models. It can be devices with shelves, hangers, type "P" and "M" - figurative, as well as a mixed look.

Budgetary coils "Nika" can be with bottom, top and side connection. The most inexpensive P 1 32/80 costs 1600 rubles, made in the form of the letter "P".

Coils of type M 1 60 * 40 and other sizes are from 1650 p. They are made of stainless steel and are designed for small bathrooms, have a classic M-shape. These devices are designed for working pressure 3−25 atm, heat transfer 125 W, lateral connection, warranty period 5 years.

The improved mixed model PM 1 60/40 already has a large heat transfer of 232 W, with a wall thickness of 2–3.5 mm and plasma polishing, costing 2,690 r.

In the middle price segment there are variants of ladders with arched jumpers such as L. D. Cost of these devices starts from 6,000 p., heat transfer 260 W, heated area of \u200b\u200b3 square meters. m, test pressure 40 atm. A ladder-bend of the same heat transfer type L Z, the price of which is from 4,960 rubles, will cost a little cheaper to the buyer. and a ladder L90, worth 5 120 p. with the same technical parameters.

Towel rails of new design developments are more expensive, for example, Nick L. B. 1 60 / 50−7, represented by three running sizes, costing from 9,000 rubles, and heat transfer of 400 watts.

Another Russian company produces heated towel rails of modern design - this aquaStal company.The company has long been using new equipment for the most advanced technologies. The material for the manufacture of heated towel rails is imported imported stainless steel, which is highly resistant to corrosion processes. Strength test produce 2 times under a pressure of 25-50 atm.

Water-economy towel rails of economy class Margroid, view 35 of the simplest view are from 800 p. (32 * 40 cm), with increasing size, the cost increases (50 * 80 cm - 1250 p.). Heated towel rails of the middle price category Margroid, type 24 are from 1650 p. (32 * 40 cm) and above.

Heated towel rails of the so-called premium class cost more than 3500 r. and have an original look, such as Margroid 11 A, with an initial price of 7,340 r. (60 * 60 cm). On the market there are devices manufactured not only by representatives of these companies, but also by many others. And basically it’s quality productssuitable for our conditions of thermal systems. You just have to decide on the necessary heat dissipation for your room and the appearance that is acceptable to you.

2016-06-03 13:57:38

For many years now I have been faced with the problem of wet towels, as drying in the street does not always work. I wanted to know where to connect the heated towel rail to which supply source? Can it still work when cold water is turned on?